SEKCE F - MODELOVÁNÍ TECHNOLOGICKÝCH PROCESŮ

Datum: 15.11.2018

13:00 - 13:25
F1
CESAR DE SA Jose
INEGI, University of Porto, Porto, Portugal, EU
A Simple Regularization Procedure for Ductile Modelling Using a Commercial Code - VYŽÁDANÁ PŘEDNÁŠKA
13:25 - 13:45
F2
TOLKUSHKIN Andrey
Ural Federal University, Yekaterinburg , Russian Federation
Damage Criterion Comparison at Unidirectional and Alternating Torsion of Samples
13:45 - 14:05
F3
KOMISCHKE Tim
Institute of Virtual Manufacturing, ETH Zürich, Zürich, Switzerland
On the Sensitivity of the Mohr-Coulomb Ductile Fracture Criterion in the Mixed Stress-strain Space on Varying Hardening Curve Approximations
14:05 - 14:25
F4
LYPCHANSKYI Oleksandr
AGH University of Science and Technology, Cracow, Poland, EU
Characterization of Ti-6Al-2Sn-4Zr-6Mo Alloy Flow Behaviour Using Malas’s Stability Criterion
14:20 - 14:40
COFFEE BREAK

Datum: 15.11.2018

14:40 - 15:00
F5
MARADA Ondřej
IDIADA CZ a.s., Brno, Czech Republic, EU
Introduction of IDIADA CZ Company - KOMERČNÍ PREZENTACE
15:00 - 15:20
F6
PREHM Jens
Dynaweld GmbH & Co. KG, Kamen, Germany, EU
Simulation Chain of Material Simulation, Welding Simulation and Heat Treatment Simulation for Industrial Application
15:20 - 15:40
F7
KOCK Christoph
IFUM - Institut für Umformtechnik und Umformmaschinen, Hannover, Germany, EU
Experimental-numerical Approach to Efficient TTT-generation for Simulation of Phase Transformations in Thermomechanical Forming Processes
15:40 - 16:00
F8
PANIN Yevgeniy
Karaganda state industrial university, Temirtau, Kazakhstan
Obtaining of Long-length Rods with Ultrafine-Grained Structure by the Radial-shear Rolling
16:00 - 16:20
COFFEE BREAK

Datum: 15.11.2018

16:20 - 16:40
F9
ZYGUŁA Krystian
AGH University of Science and Technology, Cracow, Poland, EU
Extrusion of Al-Si Alloy Compacts under Conventional Conditions and in the Semi-Solid State
16:40 - 17:00
F10
ASFANDYAROV Rashid
Ufa State Aviation Technical University, Ufa, Russian Federation
Modeling of a Combined Process for the Production of Contact Wires for High-speed Railways
17:00 - 17:20
F11
CEJPEK Jakub
IDIADA CZ a.s., Hradec Králové, Czech Republic, EU
Abaqus Simulation on HPC
17:20 - 17:40
ZRUŠENO

Datum: 16.11.2018

08:30 - 08:55
F13
GERKE Steffen
Universität der Bundeswehr München, Neubiberg, Germany, EU
Damage and Failure of Ductile Metals: Modelling, Numerical Simulations and New Biaxial Experiments - VYŽÁDANÁ PŘEDNÁŠKA
08:55 - 09:15
F14
FEDORKO Mikuláš
COMTES FHT a.s., Dobřany, Czech Republic, EU
Determination of Edge Strain in DP Steel Sheet for Predicting Edge Cracking
09:15 - 09:35
F15
FARAHNAK Pedram
COMTES FHT a.s., Pilsen, Czech Republic, EU
Determination of Forming Limits of TWIP Steel Sheet Using Linear and Nonlinear Strain Paths
09:35 - 09:55
F16
URBÁNEK Miroslav
COMTES FHT a.s., Dobrany, Czech Republic, EU
Refinement of a Material Model for Springback after Press Forming
09:50 - 10:10
COFFEE BREAK

Datum: 16.11.2018

10:10 - 10:30
F17
SVICHKAR Alena
Omsk State Technical University, Omsk, Russian Federation
The Internal Stretching Tension in the Iron Casting
10:30 - 10:50
F18
IVANOVA Jordanka
Institute of mechanics at Bulgarian academy of sciences, Sofia, Bulgaria, EU
Modelling and Parametric Analysis of Cohesive Interface Delamination of Graphene Monolayer Nanocomposites
10:50 - 11:10
F19
PETROVA Tatyana
Institute of chemical engineering at Bulgarian academy of sciences, Sofia, Bulgaria, EU
Modeling of Interface Stress Transfer in Graphene Monolayer Nanocomposites under Static Extension Load
11:10 - 11:30
F20
BARTKOWSKI Piotr
Warsaw University of Technology, Warszawa, Poland, EU
Experimental and Numerical Study on the Behaviour of Vacuum Packed Particles
11:30 - 12:30
OBĚD

Zpět